Not to worry, the installation is Diy friendly. Purchase a "pop up style" sink drain. You can find one by "clicking here". Preparation: Clean the stone fossil sink and set it on your table. To install the drain: Place the sink and outline the drain hole. Take a sharpie and draw around the drain hole on the tabletop. Take a drill and put a "2" hole in the table top. You can get one by "clicking here". Apply some glue to the bottom of the sink. "click here". Set the sink on the table and make necessary adjustments. The glue will fully cure in 24 hours. How to install the faucet. Purchase a "single hole" hot/cold faucet. Get one by "clicking here". Take a drill and put a 1.5" hole where you want the faucet. Purchase a drill bit by "clicking here". Install the faucet cold and hot water lines; they will be marked. Here is a video. Please "click here" to watch. Pro Tip: Wax your sink yearly to return the original luster. You can find it by "clicking here". Call 253-600-7093 if you want to speak to a "real" person!

Gently tip the Balinese Umbrella upside down, then push down on the "yoke" to expose the hole. There are two holes drilled in each umbrella. Slide the wooden peg into the hole and release the yoke. If you cannot locate the holes rotate the pole 90 degrees. Here is a tutorial video showing how to open a balinese 'bali" fringe tassel umbrella with shells easily by tipping it upside down.

For seasonal protection, use a fabric water repellent like "Scotchguard". This will act as a barrier between the macrame and dust that may accumulate from exposure to the outdoors. "Dawn Platinum Plus" and very hot water will remove the seasonal protection. We recommend yearly cleaning. To remove deep stains and mold spots, easily use a "Mr. Clean" magic eraser.

For our teakwood products we suggest beeswax coating yearly to restore it's luster. You can use any manufacturer as long as the wax does not have any additives to it and is non-toxic. Petrified wood sinks you should clean those out yearly as well. We suggest a mild abrasive to clear any calcium deposits away and return the natural luster to the wash basin. All purpose compound found online or at an automotive warehouse will do. Just make sure to rinse thoroughly after the polishing is completed.

You can use wood filler or epoxy to fix checks or cracks. Alternatively you can use PL Max that dries quickly and have the ability to sand within 24hrs. Detailed instructions are available on our website.

Yes, we provide a detailed pdf care guide for wood and stone products on our website. We also have youtube tutorials available to view.

Yes, assembly instructions are included with your purchase. Contact us if you need additional assistance.

Stone garden statues and limestone carvings should be cleaned with a soft brush and then hosed with water clean. If there is a blemish on the carving you can shave some of the soft limestone clear with a file.